37a4e8b5c5c5d051f18bf9f200ecd313

Микросхема PIC16F676-I/SL, Микроконтроллер 8-Бит, PIC, 20МГц …

Поставка электронных компонентов в Ижевск

73,50 руб.

x 73,50 = 73,50
Сроки поставки выбранного компонента в Ижевск уточняйте у нашего менеджера
НаличиеСрок1шт20шт50шт100шт1000шт5000шт10000шт50000шт
Склад №110-12 дней73,50руб.68,36руб.66,15руб.64,68руб.60,27руб.58,80руб.57,33руб.52,92руб.
НаличиеСрок1шт20шт50шт100шт1000шт5000шт10000шт50000шт
Склад №25-7 дней133,04руб.122,01руб.119,81руб.116,87руб.108,78руб.106,58руб.103,64руб.93,35руб.
НаличиеСрок1шт20шт50шт100шт1000шт5000шт10000шт50000шт
Склад №35 дней171,99руб.158,76руб.155,09руб.151,41руб.141,12руб.137,45руб.134,51руб.120,54руб.
НаличиеСрок1шт20шт50шт100шт1000шт5000шт10000шт50000шт
Склад №47-10 дней88,20руб.80,85руб.79,38руб.77,18руб.72,03руб.70,56руб.68,36руб.61,74руб.
НаличиеСрок1шт20шт50шт100шт1000шт5000шт10000шт50000шт
Склад №55 дней169,79руб.156,56руб.152,88руб.149,21руб.144,80руб.139,65руб.132,30руб.119,07руб.

Характеристики

PIC16F676-I/SL, Микроконтроллер 8-Бит, PIC, 20МГц …The PIC16F676-I/SL is a 8-bit Flash-based CMOS Microcontroller features 1 comparator and 128 bytes of EEPROM data memory. The PIC16F676 has a watchdog timer that is controlled by configuration bits. It runs off its own RC oscillator for added reliability. There are two timers that offer necessary delays on power-up. One is the Oscillator Start-up Timer (OST), intended to keep the chip in reset until the crystal oscillator is stable. The other is the Power-up Timer (PWRT), which provides a fixed delay of 72ms (nominal) on power-up only, designed to keep the part in Reset while the power supply stabilizes. There is also circuitry to reset the device if a brown-out occurs, which can provide at least a 72ms reset. With these three functions on-chip, most applications need no external Reset circuitry.

• Programmable pull-up resistors
• MPLAB® ICD-2 programming support or debugging support with optional header adapter
• 8 Oscillator selections including 4MHz RC oscillator with programmable calibration, power-on reset
• Power-saving sleep mode
• Interrupt-on-pin change
• Individual programmable weak pull-ups
• Programmable code protection
• High endurance flash/EEPROM cell